Cleaning chemical compatibility
Loop materials and joints must tolerate the winery's CIP regime and temperature swings.
Industries / Wineries
Temperature Control and Transfer Lines for Wineries
Stainless distribution for jacket cooling, cellar temperature control and gentle product transfer, built to survive washdown and seasonal cycling.
Application requirements
What This Application Demands
The pipework is specified by the failure modes it has to prevent, not by a catalogue part number.
Leak-free jackets
Tank-jacket and cellar loops are pressure and leak verified before installation.
Gentle transfer
Smooth internal bore and well-finished joints reduce turbulence and hold-up.
Seasonal flexibility
Custom port counts and layouts match existing tank farms without forcing a standard catalogue geometry.
Where our piping fits
Components We Build for This Application
Complete loops are engineered to your P&ID or CAD package; these are the building blocks we fabricate in-house.
Temperature-control manifolds
Custom headers feeding tank jackets and cellar zones.
Made to drawing
Transfer line spools
Bent and formed runs with flanged or pressed ends.
Made to drawing
Stainless fittings
Press, weld and flange connections for fast layout changes.
Made to drawing
Typical configuration
Specified Per Project
The table below describes the parameters we normally agree at engineering review. Nothing here is a fixed catalogue SKU - final values follow your drawing, coolant and acceptance criteria.
Standards quoted on this site refer to materials, fittings and our quality management system - not to a winery process certification.
| Material | AISI 304 / 316L seamless stainless |
|---|---|
| Connections | Flanged, pressed, threaded or welded to drawing |
| Verification | Hydraulic pressure test; helium leak test on custom assemblies |
| Documentation | EN 10204 3.1 MTC on request with the order |
Delivery
From Drawing to a Tested Assembly
One engineering team owns the loop from manufacturability review through to the leak-test record.
- Send the drawingP&ID, isometric or CAD package with flow rates, coolant type and interface points.
- Engineering reviewMaterial compatibility, wall thickness, joint method and routing checked, with a manufacturability proposal returned.
- FabricationIn-house cutting, bending, welding, passivation and dimensional inspection under one roof in Foshan.
- VerificationHelium leak test, hydraulic pressure test and MTC documentation before export packing.
Related
Continue Exploring
Every industry page links back to the hub and to the other four sectors.
Next step
Have a loop to build?
Send the drawing or a component list. Our engineers reply with manufacturability feedback, an indicative lead time and a quote.